Single Torsion Springs

Single Torsion Springs

Torsion springs can be used to neutralize, lift, rotate, and or center rotating loads or torques.

  • Wire sizes from .008" to .625"
  • Wide variety of leg lengths, shapes, anchoring configurations and coil diameters.
  • Multiple end configurations
  • Pitched and Tight wound capabilities
  • Tight angle tolerances available

Single Torsion Springs

Torsion springs can be used to neutralize, lift, rotate, and or center rotating loads or torques. Single Torsion springs are produced at Winamac Coil Spring on computer controlled equipment. A wide variety of leg lengths, shapes, anchoring configurations and coil diameters are available to meet your torsion spring application.

Improve Life of Your Spring

Winamac Coil Spring offers custom in-house shot peening for torsion, compression and/or extension springs to improve fatigue life for the most demanding requirements.

Torsion

Torsion

Formula

formula

Hinge

hinge

 

Short Hook

 

short_hook

 

Straight Offset

 

straight_offset

 

Straight Torsion

straight_torsion

 

 

Special Ends

special